Excel Fibre Tehnology WARMCEL Insulation

Roof Structure diagram p04 angle A11254 09 Brick Cladding Standard Wall I Beam


Warm and Sloping Roof Installation

When installing WARMCEL in sloping roofs the preferred method is dry injection using a needle or, commonly, the hose without the lance connected.

The injection needle is docked with the panel by means of pre-drilled access holes through which the WARMCEL is injected. An ingenious pressure-sensing system ensures the void is completely filled to the correct density for optimum performance.

Preferred access in sloping roof sections is via the eaves or from the horizontal loft area above the sloping section (if this exists), so that sheet materials are not disturbed.